Updated the dual monitor stuff with some metadata and got a more recent screenshot of dual monitors on a stock standard Windows XP.

documentation/manual/source/dualmonitors.rst

@@ -3,7 +3,7 @@ Dual Monitor Setup
 ==================
 
 The first step in getting OpenLP working on your system is to setup your
-computer properly for dual monitors. This is not very difficult, but the steps 
+computer properly for dual monitors. This is not very difficult, but the steps
 do vary depending on operating system.
 
 Most modern computers do have the ability for dual monitors. To be certain
@@ -19,11 +19,13 @@ monitors will have two of, or a combination of the two connectors below.
 .. image:: pics/dvi.png
 
 A laptop computer setup only varies slightly, generally you will need only one
-of outputs pictured above since your laptops screen serves as one of the 
+of outputs pictured above since your laptops screen serves as one of the
-monitors. Sometimes with older laptops a key stroke generally involving the FN
+monitors. Sometimes with older laptops a key stroke generally involving the
-key and another key is required to enable the second monitor on laptops.
+:kbd:`Fn` key and another key is required to enable the second monitor on
+laptops.
 
-Some computers also incorporate the use of S-Video or HDMI connections.
+Some computers also incorporate the use of :abbr:`S-Video (Separate Video)` or
+:abbr:`HDMI (High-Definition Multimedia Interface)` connections.
 
 A typical OpenLP set up consist of your normal single monitor setup, with your
 projector setup as the second monitor. With the option of extending your
@@ -39,49 +41,47 @@ next.
 Windows 7
 ^^^^^^^^^
 
-Windows 7 has using  a projector in mind. Simply connect your projector and 
+Windows 7 has using  a projector in mind. Simply connect your projector and
-press the **Windows key and tap P**.
+press :kbd:`Windows+P`.
 
-The more traditional way is also fairly straight forward. Go to the control 
+The more traditional way is also fairly straight forward. Go to
-panel and click on display. This will open up the Display options. You can 
+:guilabel:`Control Panel` and click on :guilabel:`Display`. This will open up
-also bypass this step by right click on a blank area on your desktop and 
+the :guilabel:`Display` dialog. You can also bypass this step by right click on
-selecting **resolution**.
+a blank area on your desktop and selecting :guilabel:`Resolution`.
 
 .. image:: pics/winsevendisplay.png
 
-Then click on the Screen Resolution from the left pane.
+Then click on the :guilabel:`Adjust resolution` link in the left pane. Enable
+your projector and make sure that the selected value for :guilabel:`Multiple
+displays` is :guilabel:`Extend these displays`.
 
 .. image:: pics/winsevenresolution.png
 
-Then enable your projector and ensure your desktop is extended.
-
 Windows Vista
 ^^^^^^^^^^^^^
 
-From the control panel click on personalize, or right click a blank place on
+From :guilabel:`Control Panel` click on :guilabel:`Personalize`, or right click
-the desktop and click personalization. 
+a blank place on the desktop and click :guilabel:`Personalization`.
 
 .. image:: pics/vistapersonalize.png
 
-From the **Personalization** window click on Display Settings.
+From the :guilabel:`Personalization` window click on :guilabel:`Display
+Settings`. Then enable the montior that represents your projector and make sure
+you have checked :guilabel:`Extend the desktop onto this monitor`.
 
 .. image:: pics/vistadisplaysettings.png
 
-Then enable the montior that represents your projector an make sure your
-you have checked Extend the desktop.
-
 Windows XP
 ^^^^^^^^^^
 
-From the control panel select Display, or right click on a blank area of the 
+From :guilabel:`Control Panel` select :guilabel:`Display`, or right click on a
-desktop and select properties. From the properties window click on the settings
+blank area of the desktop and select :guilabel:`Properties`. From the
-tab.
+:guilabel:`Display Properties` window click on the :guilabel:`Settings` tab.
+Then click on the monitor that represents your projector and make sure you have
+checked :guilabel:`Extend my Windows desktop onto this monitor`.
 
 .. image:: pics/xpdisplaysettings.png
 
-Then enable the monitor that represents your projector an make sure your
-you have checked Extend the desktop.
-
 Linux
 -----
 
@@ -91,22 +91,22 @@ assumes that you have properly set up any proprietary drivers if needed. You
 should seek out your distributions documentation if this general guide does not
 work.
 
-GNOME 
+GNOME
 ^^^^^
 
 This guide is for users of the GNOME desktop who do not use proprietary drivers.
-From most distros go to System --> Preferences --> Display Settings (Monitors)
+From most distros go to :menuselection:`System --> Preferences --> Display
+Settings (Monitors)`. Set up your projector with the correct resolution and make
+sure that :guilabel:`Same image on all monitors` is **unchecked**.
 
 .. image:: pics/gnome.png
 
-Setup your projector with the correct resolution and make sure you do **not**
-have mirrored desktop enabled (same image on all monitors).
-
 KDE
 ^^^
 
 This guide is for users of the KDE desktop who do not use proprietary drivers.
-From most distros click the Kick Off menu and navigate to **system settings**
+From most distros click the Kick Off menu and navigate to
+:guilabel:`System Settings`
 
 .. image:: pics/kdesystemsettings.png
 
@@ -118,66 +118,63 @@ From here you will need to set up your projector with the appropriate
 resolution, and position. OpenLP works best projecting to the monitor on the
 right.
 
-Linux Systems Using nVida Drivers
+Linux Systems Using nVidia Drivers
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-This guide is for users of the proprietary Nvidia driver on Linux Distributions.
+This guide is for users of the proprietary nVidia driver on Linux Distributions.
 It is assumed that you have properly setup your drivers according to your
-distribution's documentation, and you have a working xorg.conf file in place.
+distribution's documentation, and you have a working ``xorg.conf`` file in place.
 
 If you wish to make the changes permanent in setting up your system for dual
-monitors it will be necessary to modify your xorg.conf file. It is always a good
+monitors it will be necessary to modify your ``xorg.conf`` file. It is always a
-idea to make a backup of any critical file before making changes::
+good idea to make a backup of any critical file before making changes::
 
-  user@linux:~ $ sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.old 
+  user@linux:~ $ sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.old
 
-or for those using systems that use the root user instead of sudo, change to 
+Or for those using systems that use the root user instead of sudo, change to
 root and enter::
-  
-  root@linux: # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.old 
 
-The exact location of the xorg.conf file can vary so check your distribution's 
+  root@linux: # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.old
-documentation.
 
-If you want to make your changes permanent run nVidia settings from the terminal::
+The exact location of the ``xorg.conf`` file can vary so check your
+distribution's documentation.
 
-  user@linux:~ $ sudo nvidia-settings 
+If you want to make your changes permanent run nVidia settings from the
+terminal::
 
-or::
+  user@linux:~ $ sudo nvidia-settings
 
-  root@linux: # nividia-settings 
+Or, as root::
 
-If you do not want to write the changes to your xorg.conf file simply run the
+  root@linux: # nividia-settings
-nVidia Settings program from your desktops menu, usually in an administration
-or system menu, or from the terminal as a normal user run::
 
- user@linux:~ $ nvidia-settings 
+If you do not want to write the changes to your ``xorg.conf`` file simply run
+the nVidia Settings program (``nvidia-settings``) from your desktop's menu,
+usually in an administration or system menu, or from the terminal as a normal
+user run::
 
-Once you have opened nVidia Settings, click on **X Server Display Confiuration**
+ user@linux:~ $ nvidia-settings
-Then select the monitor you are wanting to use as your second monitor and click
+
-configure.
+Once you have opened nVidia Settings, click on
+:guilabel:`X Server Display Configuration`. Then select the monitor you are
+wanting to use as your second monitor and click :guilabel:`Configure`.
 
 .. image:: pics/nvlinux1.png
 
-After clicking configure, select twinview. Then click ok.
+After clicking :guilabel:`Configure`, select :guilabel:`TwinView`. Then click
+:guilabel:`OK`.
 
 .. image:: pics/twinview.png
 
-Then click **apply** and if you are happy with the way things look click to keep
+Then click :guilabel:`Apply` and if you are happy with the way things look click
-your new settings. Don't worry if all goes wrong the settings will return back
+:guilabel:`Keep` to keep your new settings. Don't worry if all goes wrong the
-to the previous settings in 15 seconds without any action. nVidia Settings
+settings will return back to the previous settings in 15 seconds without any
-should take care of selecting your optimum resolution etc, but that can be 
+action. nVidia Settings should take care of selecting your optimum resolution
-changed as needed. When you are happy with everything click on **Save to X Configuration File**
+etc, but that can be changed as needed. When you are happy with everything click
+on :guilabel:`Save to X Configuration File`.
 
 .. image:: pics/xorgwrite.png
 
-Then click **Save** and you should be set. You may want to restart X or your 
+Then click :guilabel:`Save` and you should be set. You may want to restart X or
-machine just to make sure all the settings carry over the next time you log in.
+your machine just to make sure all the settings carry over the next time you log
-
+in.
-
-
-
-
-
-
-