Added projector documentation

manual/source/projector.rst

@@ -6,7 +6,34 @@ Projector Remote Control
 
 The Projector Manager allows you to remotely control a network-connected
 projector that conforms to the Japan Business Machine and Information System
-Associaion (JBMIA) PJLink specification. Available in OpenLP v2.2.
+Association (JBMIA) PJLink specification. Available in OpenLP v2.2.
+
+Projector Settings
+------------------
+
+The available projector options can be changed using the main settings menu by
+going to Settings -> Configure OpenLP -> Projectors tab.
+
+.. image:: pics/projector_settings_tab.png
+   :alt: Projector Settings Tab image
+
+The options available are:
+
+    Connect to projectors on startup : Check if you want to attempt to connect
+    to all projectors when OpenLP starts
+
+    Socket timeout (seconds):  Time in seconds to wait for the projector connection.
+    Available options are 2 to 10 seconds.
+
+    Poll timeout (seconds): How often to poll the projector for status information.
+    Available options are 2 to 60 seconds. NOTE: PJLink specifications call for
+    automatic disconnect after 30 seconds of inactivity.
+
+    Source select dialog interface: Select whether you want all video source options
+    on one dialog page or to use tabs to consolidate the inputs based on video group.
+
+Once you are satisfied with the settings, click on the "OK" button, otherwise click
+on the "Cancel" button to ignore changes and close the dialog.
 
 Projector Manager
 -----------------
@@ -17,149 +44,298 @@ located on the bottom-right corner of OpenLP just below the Theme Manager.
 .. image:: pics/projector_manager.png
    :alt: Projector Manager
 
-The icons on the Projector Manager tab are:
+The icons on the Projector Manager tab will depend on projector entries as well
+as how many projectors are selected at once.
+
+A list of possible projector icons are:
 
 .. image:: pics/projector_new.png
    :height: 100
    :width: 100
    :scale: 50
-   :alt: New Projector icon
+   :alt: New projector icon
 
 Add a new projector
 
+.. image:: pics/general_edit.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Edit projector icon
+
+Edit selected projector
+
+.. image:: pics/projector_hdmi.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Select video source of selected projector icon
+
+Select the video source of the selected projector
+
+.. image:: pics/custom_delete.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Delete the selected projector icon
+
+Delete the selected projector
+
+.. image:: pics/system_about.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Show information about selected projector icon
+
+Show information about the selected projector
+
 .. image:: pics/projector_connect.png
    :height: 100
    :width: 100
    :scale: 50
-   :alt: Connect Projector icon
+   :alt: Connect to selected projector icon
 
-Connect to all projectors
+Connect to selected projector
+
+.. image:: pics/projector_connect_tiled.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Connect to multiple selected projectors icon
+
+Connect to multiple selected projectors
 
 .. image:: pics/projector_disconnect.png
    :height: 100
    :width: 100
    :scale: 50
-   :alt: Disconnect Projector icon
+   :alt: Disconnect selected projector icon
 
-Disconnect from all projectors
+Disconnect from selected projector
+
+.. image:: pics/projector_disconnect_tiled.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Disconnect from multiple selected projectors icon
+
+Disconnect from multiple selected projectors
 
 .. image:: pics/projector_power_on.png
    :height: 100
    :width: 100
    :scale: 50
-   :alt: Power On Projector icon
+   :alt: Power on selected projector icon
 
-Power on all projectors
+Power on selected projector
+
+.. image:: pics/projector_power_on_tiled.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Power on multiple selected projectors icon
+
+Power on multiple selected projectors
 
 .. image:: pics/projector_power_off.png
    :height: 100
    :width: 100
    :scale: 50
-   :alt: Power Off Projector icon
+   :alt: Power off selected projector icon
 
-Power Off (standby) all projectors
+Power Off (standby) selected projector
+
+.. image:: pics/projector_power_off_tiled.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Power off multiple selected projectors icon
+
+Power Off (standby) multiple selected projectors
 
 .. image:: pics/projector_blank.png
    :height: 100
    :width: 100
    :scale: 50
-   :alt: Blank Screen icon
+   :alt: Blank screen selected projector icon
 
-Blank screen - Close the shutter on all projectors
+Blank screen - Close the shutter on selected projector
+
+.. image:: pics/projector_blank_tiled.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Blank screen multiple selected projectors icon
+
+Blank screen - Close the shutter on multiple selected projector
 
 .. image:: pics/projector_show.png
    :height: 100
    :width: 100
    :scale: 50
-   :alt: Show Screen icon
+   :alt: Show Screen selected projector icon
 
-Show screen - Open the shutter on all projectors
+Show screen - Open the shutter on selected projector
+
+.. image:: pics/projector_show_tiled.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Show screen multiple selected icon
+
+Show screen - Open the shutter on multiple selected projectors
 
 Adding a Projector
 ------------------
 
-.. image:: pics/projector_add_wizard_welcome.png
-   :alt: Add Projector Wizard welcome page
+To add a new projector, click on the "Add new projector" icon on the Projector
+Manager tab bar. You will be given an input dialog box like the below image.
 
-When you click on the 'Add Projector' icon, you will launch the wizard to help
-guide you through adding a new projector. click on :guilabel:`Next`. to start.
-On each of the following pages, there's a :guilabel:`Help` button to give you
-some hints as to what goes in what field.
+.. image:: pics/projector_add_new.png
+   :alt: Add new projector image
 
-On this page, you will enter the basic information needed to connect to the
-projector.
+The required information are "IP Address", "Port Number", and "Name" entries.
+The port number is already set with the default PJLink port.
 
-.. image:: pics/projector_add_wizard_host.png
-   :alt: Add Projector Wizard enter host page
+The "PIN" entry is only needed if the projector you are connecting to has the
+PJLink PIN set. Be careful, since most projectors have a separate entry for
+the PJLink PIN, any other network PIN or password, as well as a separate entry
+for any HTML access name/password settings (if the projector has HTML webpage
+access). The PIN setting here is ONLY used if the projector has a "PJLink access
+code" or "PJLink PIN" setting.
 
-Enter the following information:
-
-  IP Number: IPv4 or IPv6 addresses are acceptable. Required.
-
-  Port: The network port. Default PJLink port is already filled in.
-
-  PIN: If you have authenticated access enabled, enter the PIN here.
-
-Once you enter the information, click on the :guilabel:`Next` button.
-
-.. image:: pics/projector_add_wizard_edit.png
-   :alt: Add Projector Wizard enter host page
-
-On the edit page, you can add the rest of the information for your projector.
-
-  Name: A name for you to identify the projector in the manager list. Required.
-
-  Location: The location where this projector is located. Optional.
-
-  Notes: Any other notes you want for this projector. Optional.
-
-Once you have finished entering information for this projector, click on
-the :guilabel:`Next` button.
-
-.. image:: pics/projector_add_wizard_finish.png
-   :alt: Add Projector Wizard finish page
-
-Once you get to this page, your entry has been saved and is ready for use.
-Click on the :guilabel:`Finish` button to close the wizard.
-
-Congratulations - you have finished entering your new projector in the list.
+Once you are done entering the new information, click on "Save" to save the entry
+and add it to the projector manager list. Congratulations, you now have your first
+projector entry in the list and ready for control.
 
 .. image:: pics/projector_manager_list.png
-   :alt: Projector Manager with one entry
+   :alt:  Projector manager with one entry image
+
+When you have multiple projector entries selected, the projector manager toolbar
+will change to the following:
+
+.. image:: pics/projector_multiple_selection.png
+   :alt:  Projector manager with multiple entries image
+
+Once you select a projector, the icons will also change based on the status of
+the projector.
+
+Projector Status Icons
+----------------------
+
+The icons next to the projector entry in the projector manager list give you a
+quick visual status of the projector.
+
+The icons you will see for the projector are:
+
+.. image:: pics/projector_item_disconnect.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Projector disconnected icon
+
+Projector is disconnected
+
+.. image:: pics/projector_item_connect.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Projector off icon
+
+Attempting to connect to projector
+
+.. image:: pics/projector_not_connected_error.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Projector connection error icon
+
+There was an error connecting to projector
+
+.. image:: pics/projector_off.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Projector off icon
+
+Projector is off (standby)
+
+.. image:: pics/projector_warmup.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Projector warmup icon
+
+Projector is in warmup mode
+
+.. image:: pics/projector_on.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Projector on icon
+
+Projector is on
+
+.. image:: pics/projector_cooldown.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Projector cooldown icon
+
+Projector is in cooldown mode in preparation for power off/standby mode
+
+.. image:: pics/projector_error.png
+   :height: 100
+   :width: 100
+   :scale: 50
+   :alt: Projector error icon
+
+Projector is reporting some kind of error
 
 Projector Menus
 ---------------
 
-Once you have a projector entered, you can right-click on the entry and a pop-up
-menu will show.
-
 These are the descriptions of the menu items you may see. Note that the menu
-entries you see will vary depending on the status of the projector:
+entries you see will vary depending on the status of the projector. The list
+of all menu options in alphabetical order are:
 
-    Blank Screen : Close shutter so screen is blank.
+    Blank Screen : Close shutter so screen is blank. NOTE: This entry is replaced
+    with the "Show Screen" entry when the shutter is open.
 
-    Connect Projector : Connect to this projector.
+    Connect Projector : Connect to this projector. NOTE: This entry is replaced
+    with the "Disconnect Projector" entry when the projector is connected.
 
     Delete Projector : Delete this entry from the database.
 
-    Disconnect Projector : Disconnect from this projector.
+    Disconnect Projector : Disconnect from this projector. NOTE: This entry is
+    replaced with the "Connect Projector" entry when the projector is connected.
 
     Edit Projector : This will allow you to edit the information on this entry and
-    save changes to the database..
+    save changes to the database.
 
-    Power Off Projector : Tell the projector to enter standby.
+    Edit Input Source : This will allow you to customize the look of the source
+    input select screen with text that is meaningful for you. NOTE: This entry is
+    only available when the projector is connected and powered on.
 
-    Power On Projector : Tell the projector to power on.
+    Power Off Projector : Tell the projector to enter standby. NOTE: This entry
+    is replaced with the "Power On" entry when the projector is in standby.
 
-    Select Input : Select the projector video source to use.
+    Power On Projector : Tell the projector to power on. NOTE: This entry is
+    replaced with the "Power Off" entry when the projector is on.
 
-    Show Screen : Open shutter so you can see the picture.
+    Select Input : Select the projector video source the projector will use.
+    NOTE: This entry is only available when the projector is connected and
+    power is on.
 
-    View Porjector Information : This will show you the saved information on this
-    entry in the database.
+    Show Screen : Open shutter so you can see the picture. NOTE: This entry is
+    replaced with the "Blank Screen" entry when the projector shutter is closed.
 
-    View Projector Status : Will show you the information gathered from the
-    projector.
+    View Projector Information : This will show you the saved information on this
+    entry in the database as well as the extra information about the projector
+    once it's connected and talking. NOTE: This entry is only visible when the
+    projector is connected and power is either on or in cooldown mode.
+
+You will see the following menu items when you right-click on a projector item.
 
 Initial Menu
 ~~~~~~~~~~~~
@@ -171,33 +347,85 @@ from the following menu items:
    :alt: Projector not connected menu
 
 
-Projector Connected Menu 1
-~~~~~~~~~~~~~~~~~~~~~~~~~~
+Projector Connected in Standby Mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 Once the projector has been connected, and if the projector is not powered on,
 you get the below menu list:
 
 .. image:: pics/projector_item_connected_off.png
-   :alt: Projector Connected Power Off menu
+   :alt: Projector Connected Power Off Menu image
 
-Projector Connected Menu 2
-~~~~~~~~~~~~~~~~~~~~~~~~~~
+Projector Connected in Warmup Mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-Once you have connected to the projector, and the projector is powered on (either
-by being previously on or you sent the power on command), you will see the
-following menu:
+Once the projector is in warming up, you will see the following menu:
+
+.. image:: pics/projector_item_connected_warmup.png
+   :alt: Projector Connected and Warmup Mode image
+
+Projector Connected and Power On
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Once the projector is on, you will see the following menu:
 
 .. image:: pics/projector_item_power_on.png
    :alt: Projector Connected and Power On menu
 
-Source Input Options
-~~~~~~~~~~~~~~~~~~~~
+Projector Connected and in Cooldown Mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-If you want to change the video source the projetor uses, click on the
+When the projector is cooling down, you will see the following menu:
+
+.. image:: pics/projector_item_connected_cooldown.png
+   :alt: Projector Connected and Cooldown Mode menu
+
+Video Source Input Select Options
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you want to change the video source the projector uses, click on the
 "Select Source" option, then select from the pop-up window which video source
 you want to use.
 
-NOTE: The picture is an example only - what options you
-will have will vary depending on the projector you have.
+You have an option of setting two different styles for selecting the video source.
+The default option is all entries on one radio button dialog. The Other option
+is to have the selections grouped by type. This option is available in the
+Settings -> Configure OpenLP -> Projectors tab under the "Source Select dialog
+interface" option.
 
-.. image:: pics/projector_source_select.png
+NOTE: These images is an example only - what options you will have will vary
+depending on the projector you have. These images show the default PJLink text.
+
+"Single dialog box" will give you the following menu dialog:
+
+.. image:: pics/projector_source_select_single.png
+   :alt: Source select dialog single menu image
+
+"Tabbed dialog box" will give you the following menu dialog:
+
+.. image:: pics/projector_source_select_tabbed.png
+   :alt: Source select dialog tabbed menu image
+
+Video Source Input Edit Options
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When you want to customize how the video source select text looks, you will see
+a dialog box that looks like the following (NOTE: this is the single dialog
+box - the tabbed dialog box will have similar options available):
+
+.. image:: pics/projector_source_edit_single.png
+   :alt: Source edit dialog single menu image
+
+Once you are satisfied, you can click on the "OK" button to save the changes,
+or click on the "Cancel" button to discard these changes and continue to use
+the previously saved user-defined text (or the PJLink defaults if you have no
+previously saved user-defined text).
+
+If you don't like the changes, the "Reset" button will reset the text back to
+the previously saved text (or PJLink defaults if you have no previously saved
+user-defined text) and allow you to continue editing.
+
+If you _really_ don't like the text, you can select the "Discard" button and
+remove all entries from the database. WARNING: This will delete _all_ of the
+user-defined entries for this projector in the database and return them to the
+PJLink defaults.