Initial projector documentation

manual/source/projector.rst

@@ -0,0 +1,69 @@
+.. _projector:
+
+========================
+Projector Remote Control
+========================
+
+The Projector Manager allows you to remotely control a network-connected
+projector that conforms to the Japan Business Machine and Information System
+Associaion (JBMIA) PJLink specification.
+
+Projector Manager
+-----------------
+
+The Projector Manager is the interface to controlling your projector(s). It is
+located on the bottom-right corner of OpenLP just below the Theme Manager.
+
+.. image:: pics/projector_manager.png
+
+The icons shown are for (in order from left to right):
+
+.. image:: pics/projector_new.png  Add a new projector
+.. image:: pics/projector_connect.png  Connect to all projectors
+.. image:: pics/projector_disconnect.png  Disconnect from all projectors
+.. image:: pics/projector_power_on.png  Power on all projectors
+.. image:: pics/projector_power_off.png  Power Off (standby) all projectors
+.. image:: pics/projector_blank.png  Close the shutter on all projectors
+.. image:: pics/projector_show.png  Open the shutter on all projectors
+
+Adding a Projector
+------------------
+
+.. image:: pics/projector_add_wizard_welcome.png
+
+When you click on the 'Add Projector' icon, you will launch the wizard to help
+guide you through adding a new projector. click on the :guilabel:`Next`.
+
+On this page, you will enter the basic information needed to connect to the
+projector.
+
+.. image:: pics/projector_add_wizard_host.png
+
+Enter the following information:
+
+  IP Number: IPv4 or IPv6 addresses are acceptable. Required.
+  Port: The network port. Default PJLink port is already filled in.
+  PIN: If you have authenticated access enabled, enter the PIN here.
+
+Once you enter the information, click on the :guilabel:`Next` button.
+
+.. image:: pics/projector_add_wizard_edit.png
+
+On the edit page, you can add the rest of the information for your projector.
+
+  Name: A name for you to identify the projector in the manager list. Required.
+  Location: The location where this projector is located.
+  Notes: Any other notes you want for this projector.
+
+Once you have finished entering information for this projector, click on
+the :guilabel:`Next` button.
+
+.. image:: pics/projector_add_wizard_finish.png
+
+Once you get to this page, your entry has been saved and is ready for use.
+Click on the :guilabel:`Finish` button to close the wizard.
+
+Congratulations - you have finished entering your new projector in the list.
+
+.. image:: pics/projector_manager_list.png
+